General Specification

Our CNCHVR angle adjustment hydraulic guillotine shears are strong and easy to use machines which are able to cut any type of sheet with the best quality and speed.

Machine could be programmed easily with use of dialog programs on CYBELEC control units. When the type, thickness and length of the sheet is entered to the controller, machine, calculates and adjusts blade gap adjustment, backgauge distance, cutting length and cutting angle automatically.

Cutting angle adjustment is done automatically according to sheet thickness, so during cutting thin sheets the shortest stroke is used, to increase Productivity.

DAC – 360 Controller (Standard)

Compact and complete control for shearing machines. The DAC – 360 provides a complete solution for shearing machines. In addition to the x axis position it offers automatic control of cutting angle, stroke length and gap. The numerical programming is user friendly and guides the operator through the programming possibilities.

    • Panel based housing
    • Bright LCD screen
    • Backgauge control
    • Retract function
    • Cutting angle control
    • Cutting gap control
    • Stroke length limitation
    • Force control
    • Manual movement of axes

CYBELEC DNC 60G Controller

    • Automatic calculation of blade gap. Cutting angle and stroke depth according to programmed material and thickness
    • 5 pre – programmed material type
    • Stroke depth management by frequency distortion or potentiometer
    • Automatic backgauge re-adjustment according to the blade gap
    • Sequence repeat, sub programs and chain–programming
    • Multi –processor designed using ASIC and SMD. This provides full integration and high safety
    • Keyboard with ergonomic buttons
    • 75 x 130 mm Black white LCD graphic Screen (visible area). 240 x 128 pixel automatic contrast adjustment
    • Internal SRAM memory
    • Flash memory, updating with RS.232 as an Optional. 2x RS.232 port (Optional )
    • High speed (250 Khz) N2X axis with PID regulator and programmable resolution
    • Inch/mm, TON/TONS conversion
    • 16 input (24 or 32 optional)
    • 16 output (24 or 32 optional)
    • Easy cut page
    • Flying cut
    • On CNCHVR, blade gap adjustment, stroke adjustment and backgauge position is automatically adjusted from the DNC controller unit according to the sheet thickness. (Standard)

Collapsible Front Cover

For safety reasons, front sides of the downs are closed with a protection cover and upon customers request, 1m. part on the left side of this cover could be opened. With the help of this system, angles or drawn line cutting could be done easily and controllable.


With the help of 350 mm throat depth on standard models, it is possible to cut longer sheets than the standard cutting length thus avoiding extra workmanship costs due to the longer sheets. Throat depth can be designed up to 500 mm upon request

Laser Cutting Line

With the help of laser cutting line, angle or drawn line cuttings could be done easily and controllable. (Optional)

Pneumatic System

Pneumatic sheet support system provides user an easy method of working which is an Optional function to protect hanging of sheet down and to improve cutting precision during long and thin sheets Processing.


    • Mono block, welded sheet frame is rigid to deflection moment and high tensile with ST 44 A1 material
    • Fast and powerful backgauge with 1000mm distance, moving by ball screwed shafts, with automatic swing away feature
    • Avoiding sheet sliding during cutting action, powerful hold downs with maximum performance
    • Roller bearings on the table helps in easy placing sheets on machine
    • CYBELEC DNC 61 G cut controller
    • Honed hydraulic cylinders and chrome coated pistons
    • High quality top and bottom blades

      Bottom : 4 Cutting Sides

      Top :4 Cutting sides
    • Hydraulic operated blade gap and angle adjusting system with CNC control
    • Bosch – Rexroth hydraulic system
    • High pressurized silent ATOS pump
    • Front support arms with ruler and flip – stop
    • Foot pedal available for single or continuous cutting
    • Cutting line illumination and shadow line
    • 350mm throat depth
    • Side and rear guards
    • Automatic series cutting flying cut
    • CNC controlled automatic angle adjustment, stroke adjustment, hydraulic blade gap adjustment

Optional Equipments

    • Pneumatic sheet support system,
    • Angular front gauge,
    • 500mm throat depth,
    • Oil coolant,
    • Laser cutting line,
    • Finger protective light curtain,
    • Longer front arms or squaring arm,
    • Automatic stacking system,
    • Dynamic backgauge with servo motors,
    • X1, X2 backgauge for angular cutting,
    • Stainless steel cutter.